Mr. Barry was getting suspicious,
Was my broken bone merely fictitious?
Just a lazy girl’s ploy,
To abuse that poor boy,
And evade five whole weeks washing dishes.
My broken pinkie has finally been set free of immobilization, so I was able to wash the dishes yesterday. Barry really did wash all dishes for the past five weeks — my hero!
The place where we’re hauled out right now, St. Mary’s Boat Services, has a unique way of turning a little boatyard into a big one — they put many of the boats on cradles, so they can be moved easily and packed more densely. They use a forklift and a specialized hydraulic trailer to move the cradles around.
There’s a fellow here named Jeff who happens to be the most amazing forklift operator I’ve ever seen. He can do ballet-like things with the forklift that other boatyards need cranes and other complicated equipment to do. Yesterday, I heard him telling someone that in addition to training and certifying forklift operators for all of southern Michigan, he used to be able to pick up a quarter from the ground and hand it to you — using a forklift. “Not this one, though. The controls are too slow.”
Yesterday, Jeff and his boss, Rocky, needed to move four boats in order to make room for one who was ready to splash today. The first two moves were easy, just towing a couple of folks on cradles to new spots. Flutterby was the third boat in, on jackstands, and right after they picked her up with the Travelift, a van pulled in, delivering two shiny new cradles. There was quite a bit of excitement, because this was the first time Rocky and Jeff hadn’t welded up their own cradles.
As you can see, the first new one works perfectly. Now Flutterby can be scooted around in the forklift ballet, too. At dusk last night, they moved us to our new place, right across from a huge live-oak tree that is full of the cutest little birds on the planet: Bluebirds! It looks like somebody painted their topsides with the same paint Barry used on our bottom.
Imagine that for the last couple of years, someone followed you around with a camera, capturing as many of your happy times as possible. What a gift to your family and friends, and what a gift to the photographer, to have captured so much of your joyful spirit on film.
Since 2011, I took that role with my beloved friend and artistic partner, Philip Wilson. I photographed all our adventures together, from one end of the USA to the other, especially Burning Man and Mexico. I documented every step of our joint art installation, Choose Art.
And then, just like that, he was suddenly gone, passing away too young and too soon last weekend. Although they make me cry now, I hope these images of his infectious smile will bring some joy and happiness to the world. That’s what he would want.
Hardship may dishearten at first,
But every hardship passes away.
All despair is followed by hope;
And darkness is followed by sunshine.
~ Rumi
Even though I am thousands of miles away from my boat this summer, she is always on my mind. This week, I’ve been all smiles, because Issue 63 of the Junk Rig Association Magazine just came out, with another article (by yours truly) about Flutterby.
For over 15 years, Barry and I have been members of the Junk Rig Association, an international group of people who are interested in junk rigs. They’ve been following our progress with Flutterby‘s unique rig, and when I wrote about our first test sail, the editor of the newsletter asked to reprint my article.
“Urk!” I choked to Barry. I was a little embarrassed. I’d written that piece in a very exuberant but tongue-in-cheek style, and putting it into an international publication required some major rewriting. I carefully rewrote it, splitting the article into two parts, and submitted it with photos:
Flutterby Gets an ‘A’ on Her Test Sail (PDF)
Look! They’re Taking Our Picture! (PDF)
I am so proud to share these with you! Not because of my writing, but because I was able to share Barry’s accomplishment with the world. He has designed and built his own rig, the only one like it in the world, and it works!
Many members of the JRA are expert sailors who know that the Bermudan rig is not the only option. We’re not nuts or crackpots, just evangelists for something that’s worked for thousands of years. Of course, writing for the JRA Magazine is like preaching to the choir.
Even if you never plan to own a junk-rigged boat, the JRA is a wonderful, encouraging organization that produces a beautiful, inspiring magazine. Check out the JRA website: http://junkrigassociation.org/.
At the end of next week, I’ll be living aboard Flutterby, currently in Georgia, for the first time in seven months. Ohio, Washington, and California were great, but I’m looking forward to unpacking my suitcase again.
“Now, I really don’t want to complain,”
Said the birthday girl known as Loraine,
“But that powerful twist
Of the cap in your fist,
Was a gift that upstaged the champagne!”
~
Although she asked for no gifts on her 100th birthday, I couldn’t resist giving Barry’s Grandma some champagne with custom labels celebrating the big day. After we admired them, I put them in her refrigerator. The next day, before we left for the airport, I asked if she’d like Barry to open one of them for her to enjoy later. “Oh, yes, yes, yes!” she said, delighted. It’s not that she can’t buy her own champagne, she just doesn’t have the hand strength to open it once she gets it home.
Two years ago, when she was only 98, I wrote about Loraine in a piece entitled, The Life of the Party. She is the inspiration for the infamous toast started by the late Bill Brown, “Here’s to Loraine,” which we have used all over the world whenever we drink something festive.
I should search for myself on the ‘net,
For this week I could never forget,
Cameras on either side,
Snapping pix of our ride,
As we cruised down the Ditch, all sails set.
This is another limerick I wrote last month, when we sailed the ICW from Vero Beach to St. Mary’s, Georgia. Eventually, I’ll get used to all the cameras pointed our way — this is what we get for making such an unusual and beautiful rig!
“OK, what’s that I see?” I asked Barry,
When dear Flutterby sailed to St. Mary.
“Just a sub and some tugs,
And a lot of lovebugs,
And a gawker or ten on the ferry.”
It was a light wind day in May, and we’d been swatting at annoying but non-biting lovebugs all morning. We took a lot of photos of a giant submarine going out to sea, escorted by tugs and other ships. But when the ferry to Cumberland Island passed by, all the cameras were pointed at Flutterby, instead. She’s a lot more colorful.
You’re going to love this! Mepsnbarry.com now has a short video of Flutterby sailing, with a musical soundtrack featuring my friends Michael Greiner and Doeri Welch. I filmed it during our shakedown cruise with the new junk rig in December, 2012, in the Intracoastal Waterway, near Wabasso, Florida. The “Easter Egg” portion came from a 2009 Christmas celebration on the hard, in North Carolina.
There once was a practical sailor,
Who went off to pick up some kale. Her
Pink bike was too small,
For fruits, veggies, and all,
So she shopped with her bicycle trailer.
The picture says it all — sailboat, dinghy, two kayaks, and a pink folding bicycle with a trailer. Who needs a car?
On Thursday, the 13th of December, the sky in Brunswick, Georgia was gray and cloudy, threatening rain. The temperature had plummeted, and boaters in the marina hunkered down in their cabins by their heaters. A steady stream of cruisers had left the Brunswick Landing Marina in the prior two weeks, heading south in search of sunshine.
I stopped in the office that morning to give Sherry a heads-up. “If you notice our slip is empty today, we’re not leaving without paying our bill. We’re going out for our first test sail.” She gave me a big encouraging smile and a thumbs-up.
We rooted through our lockers and dressed as if we were going for a winter sail in the Pacific Northwest, putting on layers of thermal underwear, wool socks, fleece jackets, gloves, and those ubiquitous waterproof red jackets and black bibs we call “foulies.”
A warning here for our landlubber friends: If that technical term left you shaking your head in dismay, beware of what’s coming. Even our sloop-rig friends may complain that I’m using too much junk-rig jargon. Since it’s hard to scroll back and forth to footnotes in a web document, I’ll explain the jargon as best I can at the bottom of each paragraph.
We departed the marina on 12-13-12 at 13:01. It took us about a half hour to motor up the East river to the Brunswick river, which is wide and deep. Looking up the river, we could see a couple of huge container ships docked and unloading a half mile away. To the left, under the soaring Sidney Lanier Bridge, the casino boat was docked, but they weren’t moving either. We had the river to ourselves, so we set about hoisting our sails for the very first time.
The wind was gusty, ranging from 10 to 15 knots, and we could see by the water rushing past the navigation buoys that a wicked current was ripping through. I had hoped for a mellow, easy first sail, but that was not to be.
I left the motor running as Barry began to hoist the 500-square-foot split-rigged mainsail (the mainsail is the one in front…split-rigged means our sail extends four feet in front of the mast, but the part around the mast is cut away). Keeping in mind that the main on Flutterby’s original rig was only 350 square feet, I gave him a conservative order to keep two panels reefed (A reef is a way to make the sail smaller when the wind is blowing harder).
Our mainsail has seven panels that work kind of like a window shade. The rig was designed to easily put up to five reefs* in, and with some extra work, can even rig it in a storm with just one-seventh of the sail. However, that afternoon, the word “easily” did not apply, and the process of simply raising sails took over 45 minutes.
I was focused on the helm, making sure that we weren’t swept sideways into the massive bridge footing, as Barry started hoisting the main using the 3-part halyard. With our multi-part halyards and sheets, we end up with a lot of extra line piled in the cockpit, but we hardly ever have to use a winch.
That first hoist, though, things went wrong. As the third sail panel started to go up, Barry realized that the yard-hauling parrel* was fouled** by the topping lift***, so the yard couldn’t go up all the way. The lazy jack sail gatherer**** for the jiblets***** didn’t work.
===
*The rope that positions the yard, which is the pole at the top of our sail.
**Fouled=messed up
***Ropes from the top of the mast that hold up the sail bundle so it doesn’t fall on our heads when we are reefed or not sailing. The sail bundle includes the sail fabric and the battens, which are poles that go between each of the panels.
****Contraption of rope and webbing that hangs from the topping lift to keep things tidy.
*****On a split rig, the bits of the sail that are in front of the mast.
==
N.B. I can see that writing this to Barry’s requested technical specifications is going to be a bit of a challenge!
Our rig was designed to be sailed from the cockpit, with all the various control lines running back there. But when things go awry, somebody has to clamber up on deck and straighten it out. Barry spent a lot of time that day clambering up on deck to straighten things out. Still, we did eventually get the mainsail hoisted, and then we turned our attention to the mizzen (the smaller sail that is at the rear of the boat).
We didn’t have any problems hoisting the mizzen, and finally, it was time to turn off the engine and trust that we could maneuver this 33-foot vessel under sail alone.
Blessed quiet.
That special moment, one that all sailors know and appreciate, was followed by high-fives, cheering, and victory-dances (but not on top of the cockpit grate!) by the crew of the s/v Flutterby. For the next 60 minutes, the sound of water rushing past our hull was accented with peals of joyful laughter from yours truly. After five years of waiting for this moment, I was giddy and giggling.
The two of us took turns taking pictures and fighting for the right to steer. It was like we had a beautiful horse, and we both wanted to ride. We were both very curious to know how high she could point, or go upwind, but three knots of current kept sweeping us down the river, so our GPS track didn’t show a lot of progress. Still, we fairly flew when we went downwind, especially when we put the two sails out on opposite sides of the boat. Some junk-rig sailors call that “wing and wong” instead of “wing and wing.”
We didn’t go very fast that day, occasionally seeing boat speeds of five or six knots. We were a little unsure of ourselves, the weather, and the new rig, so we kept it slow with our double-reefs, but the potential was there to go much faster.
The whole time we were sailing, we were near the awe-inspiring bridge. The bridge towers are 485 feet, the clearance is 185 feet, and it’s the longest bridge in Georgia. Hundreds of cars passed by, along with the hardiest joggers and walkers. Did they see us? Did they notice our beautiful red-and-white butterfly sails?
Finally, we decided to call it a day and head back to the marina. Barry started the noisy engine, and I lowered the sails, a process that entails releasing the halyard* while pulling in the sheet**, the adjustable downhauls***, and the yard-hauling parrel. One thing I love is the windvane effect of the junk rig — we don’t have to turn the bow**** of the boat into the wind to raise and lower our sails. Like a weathervane, we can just let them swing freely in the wind as we raise and lower them.
===
*The line that pulls the sail up.
**The line that controls the position of the sail relative to the wind.
***Little fussy bits of rope.
****The pointy end.
===
And then we returned to our slip, triumphant. Flutterby was now a proper junk-rigged sailboat, and we were ready to head south with the other cruisers for the winter.
Pictures of the big event:
